EIGRP VLAN DHCP

EIGRP + INTER VLAN ROUTING+ DHCP

ceritanya ada 4 network (siswa,guru,dosen,mahasiswa), dibuat routing eigrp dan inter vlan routing dan dhcp

1. konfigurasi R1

R1#configure terminal
R1(config)#int s0/1/0
R1(config-if)#ip add 10.10.10.1 255.255.255.252
R1(config-if)#clock rate 64000
R1(config-if)#no shutdown
R1(config-if)#exit
R1(config)#int fa0/0
R1(config-if)#ip add 172.16.1.1 255.255.255.252
R1(config-if)#no shutdown
R1(config-if)#exit
R1(config)#int fa0/0.10
R1(config-subif)#encapsulation dot1q 10
R1(config-subif)#ip add 192.168.1.200 255.255.255.0
R1(config-subif)#exit
R1(config)#int fa0/0.20
R1(config-subif)#encapsulation dot1q 20
R1(config-subif)#ip add 192.168.2.200 255.255.255.0
R1(config-subif)#exit
R1(config)#ip dhcp pool SISWA
R1(dhcp-config)#network 192.168.1.0 255.255.255.0
R1(dhcp-config)#default-router 172.16.1.1
R1(dhcp-config)#exit
R1(dhcp)#ip dhcp pool GURU
R1(dhcp-config)#network 192.168.2.0 255.255.255.0
R1(dhcp-config)#default-router 172.16.1.1
R1(dhcp-config)#exit

R1(config)#router eigrp 1
R1(config-router)#network 10.10.10.0
R1(config-router)#network 192.168.1.0
R1(config-router)#network 192.168.2.0
R1(config-router)#end
R1(config)#copy r s


2. konfigurasi R2

R1#configure terminal
R1(config)#int s0/1/1
R1(config-if)#ip add 10.10.10.1 255.255.255.252
R1(config-if)#no shutdown
R1(config-if)#exit
R1(config)#int fa0/0
R1(config-if)#ip add 172.16.1.2 255.255.255.252
R1(config-if)#no shutdown
R1(config-if)#exit
R1(config)#int fa0/0.10
R1(config-subif)#encapsulation dot1q 10
R1(config-subif)#ip add 192.168.3.200 255.255.255.0
R1(config-subif)#exit
R1(config)#int fa0/0.20
R1(config-subif)#encapsulation dot1q 20
R1(config-subif)#ip add 192.168.4.200 255.255.255.0
R1(config-subif)#exit
R1(config)#ip dhcp pool MAHASISWA
R1(dhcp-config)#network 192.168.3.0 255.255.255.0
R1(dhcp-config)#default-router 172.16.1.2
R1(dhcp-config)#exit
R1(dhcp)#ip dhcp pool DOSEN
R1(dhcp-config)#network 192.168.4.0 255.255.255.0
R1(dhcp-config)#default-router 172.16.1.2
R1(dhcp-config)#exit

R1(config)#router eigrp 1
R1(config-router)#network 10.10.10.0
R1(config-router)#network 192.168.3.0
R1(config-router)#network 192.168.4.0
R1(config-router)#end
R1(config)#copy r s

3. Setiap switch-router atau switch-switch wajib diberi perintah trunk

Read More

Multiple VLAN DHCP Server

Melanjutkan tulisan saya disini saya akan mencoba setting banyak VLAN dan pake DHCP Server. OK langsung saja agar lebih mudah diingat, saya sertakan prinsip2nya :

1. Pengalamatan IP sudah? Saya disini mencoba ip yg umum. Network 1 (warna merah) saya kasi network ID 192.168.1.0 /24, Network 2 (warna ijo) saya kasi network ID 192.168.2.0 /24, Network 3 (kuning) saya kasi network ID 192.168.3.0 /24, dan Network 4 (warna biru) saya kasi network ID 192.168.4.0 /24

2. Setting VTP Server dan pastikan setiap switch sudah disetting TRUNK, demikian juga koneksi switch ke router. Untuk switch tengah (SVTP) saya tak buat server, yg kanan kirinya S1 dan S2 tak buat client.

3. Konfigurasi router, buat subinterface.

4. Buat konfigurasi DHCP Server. Nah disini fungsi POOL itu penting. pastikan POOL sesuai dengan networknya

ip dhcp pool ADMIN
network 192.168.1.0 255.255.255.0 ==>>  mendaftarkan network 192.168.1.0 /24
default-router 172.16.1.1


ip dhcp pool DOSEN
network 192.168.2.0 255.255.255.0 ==>>  mendaftarkan network 192.168.2.0 /24
default-router 172.16.1.1


ip dhcp pool STAF
network 192.168.3.0 255.255.255.0 ==>>  mendaftarkan network 192.168.3.0 /24
default-router 172.16.1.1


ip dhcp pool MHS
network 192.168.4.0 255.255.255.0 ==>>  mendaftarkan network 192.168.4.0 /24
default-router 172.16.1.1

Read More

OSPF Sederhana

Praktikum Cisco SMK Telkom Purwokerto
kelas 10 TJA
Semester 2 Routing & Switching Chapter 6 Single Area OSPF
Kali ini saya akan memberikan contoh konfigurasi sederhana OSPF menggunakan 1 ospf dan 2 area. Jangan lupa berikan gateway pada masing-masing PC.

Tabel Konfigurasi Router

Device	Interface	Network	Subnet	IP Address
R1	DCE s0/1/0	10.10.10.0	255.255.255.252	10.10.10.1
R1	Fa0/0	192.168.1.0	255.255.255.0	192.168.1.100
R2	s0/1/0	10.10.10.0	255.255.255.252	10.10.10.2
R2	DCE s0/1/1	20.20.20.0	255.255.255.252	20.20.20.1
R2	Fa0/0	192.168.2.0	255.255.255.0	192.168.2.100
R3	s0/1/0	20.20.20.0	255.255.255.252	20.20.20.2
R3	Fa0/0	192.168.3.0	255.255.255.0	192.168.3.100

1. Konfigurasi Awal

R1#configure terminal

R1(config)#int s0/1/0

R1(config-if)#ip add 10.10.10.1 255.255.255.252

R1(config-if)# no shutdown

R1(config-if)#clock rate 64000

R1(config-if)#exit

R1(config)#int fa0/0

R1(config-if)#ip add 192.168.1.100 255.255.255.0

R1(config-if)# no shutdown

R1(config-if)#end

R1#copy r s

R2#configure terminal

R2(config)#int s0/1/0

R2(config-if)#ip add 10.10.10.2 255.255.255.252

R2(config-if)# no shutdown

R2(config-if)#exit

R2(config)#int s0/1/1

R2(config-if)#ip add 20.20.20.1 255.255.255.252

R2(config-if)# clock rate 64000

R2(config-if)# no shutdown

R2(config-if)#exit

R2(config)#int fa0/0

R2(config-if)#ip add 192.168.2.100 255.255.255.0

R2(config-if)# no shutdown

R2(config-if)#end

R2#copy r s

R3#configure terminal

R3(config)#int s0/1/0

R3(config-if)#ip add 20.20.20.2 255.255.255.252

R3(config-if)# no shutdown

R3(config-if)#exit

R3(config)#int fa0/0

R3(config-if)#ip add 192.168.3.100 255.255.255.0

R3(config-if)# no shutdown

R3(config-if)#end

R3#copy r s

2. Konfigurasi routing OSPF

R1#configure terminal

R1(config)#router ospf 1

R1(config-router)#network 192.168.1.0 0.0.0.255 area 0

R1(config-router)#network 10.10.10.0 0.0.0.3 area 0

R1(config-router)#end

R1#copy r s

R2#configure terminal

R2(config)#router ospf 1

R2(config-router)#network 192.168.2.0 0.0.0.255 area 0

R2(config-router)#network 10.10.10.0 0.0.0.3 area 0

R2(config-router)#network 20.20.20.0 0.0.0.3 area 1

R2(config-router)#end

R2#copy r s

R3#configure terminal

R3(config)#router ospf 1

R3(config-router)#network 192.168.3.0 0.0.0.255 area 1

R3(config-router)#network 20.20.20.0 0.0.0.3 area 1

R3(config-router)#end

R3#copy r s

Read More

Praktikum RIP V2

Praktikum Cisco SMK Telkom Purwokerto
kelas 10 TJA
Semester 2 Routing & Switching Chapter 6 Static Routing 

Pada pertemuan ini saya mencoba membuat praktikum menggunakan RIP version 2. Perbedaan dengan versi 1 adalah RIP version 2 mendukung adanya Classless Inter Domain Routing (CIDR). Apa itu? Gini, subnet itu ada 2 macam, yang satu Classful, yang satu Classless. Classful itu yang tanda "/" nya /8, /16, atau /24. Nah kalo ada yang rada2 aneh misalnya /30, /29. /29, dsb2; itu termasuk dalam IP Classless.

Pada praktikum ini saya menggunakan 3 router yang terhubung dengan kabel serial. Perhatikan settingan DCE nya clock rate 64000. 

Read More

Praktikum Static Routing

Praktikum Cisco SMK Telkom Purwokerto
kelas 10 TJA
Semester 2 Routing & Switching Chapter 6 Static Routing

Read More

Setting Inter VLAN Routing

Praktikum Cisco SMK Telkom Purwokerto

Kelas 10 TJA

Semester 2 Routing & Switching Chapter 5 Static Routing

Read More

Praktikum default route pada router cisco

Praktikum Cisco SMK Telkom Purwokerto
Kelas 10 TJA
Semester 2 Routing & Switching Chapter 4 Routing Concepts

Read More